English (UK) 
Italiano 
Deutsch 
Français 
Español 
Polski 
Svenska 
Slovenščina 
Slovenčina 
Português 
Nederlands 
Dansk 
The Smart 410 Vario universal milling machine is suitable for carrying out light to medium turning work. Even the basic equipment includes all the main accessories (3-jaw chuck, steady rests, spare wheels, 3-axis position display…), so this machine can be used universally. Furthermore, this model features an infinitely variable spindle speed of up to 3000 rpm, so the speed can be adjusted depending on the workpiece and feed speed.
Properties
- Equipped with Delta frequency converter for high torque at low speeds and approximately constant speeds under load
- Continuous speed regulation; the set speed is read on a digital display
- Prism base of gray cast iron, hardened and precision ground inductively
- Central and convenient gearbox for feeds and threading with guide spindle and shaft spindle
- Modern spindle main bearing with angular bearings for precision execution
- Equipped with a frequency converter and a 3-axis position indicator
- Gears and shafts hardened and ground even during power operation
- The speed and advancement adjustment is simple in structure, smooth and can be activated precisely
- Tilting tailstock for conical turning, handwheel with adjustable precision scaling (0.02 mm)
- The removable bridge allows the processing of large diameter workpieces
Standard accessories
- ES-12 V 3-axis position display with LCD display
- 3-jaw steel chuck PO3-200 mm / D6
- Clamping plate 350 mm
- Fixed bezel - passing diam. max. 135 mm
- Rotating bezel – passing diam. max. 65 mm
- Pedal with brake function according to CE standards
- Quadruple tool holder
- Quadruple tool holder protection device
- Micrometric longitudinal stop
- Turret stop with precision adjustment
- Frequency converter
- Initial filling with Shell Tellus 46
- Refrigeration system
- Slip joint
- Thread gauge
- LED car light
- Spare wheels
- Reducing bush
- 2 central points
- Rear chip wall
- Control device
Technical specifications
|
Distance between tips |
1500 mm |
|
Height of the tips |
205 mm |
|
I twirl on the table |
410 mm |
|
Vaulting on the elbow bend |
580 mm |
|
Vaulting on flat sleds |
255 mm |
|
Bed width |
250 mm |
|
Spindle hole |
52mm |
|
Spindle taper |
DIN 55029, D1 – 6 |
|
Continuous speed range, 2 stages |
30 – 550 / 550 – 3000 rpm |
|
Longitudinal advancement area |
(17) 0.05 – 1.7 mm/rev |
|
Plan progress area |
(17) 0.025 – 0.85 mm/rev |
|
Metric threads |
(42) 0.2 – 14mm |
|
Inch threads |
(45) 2 – 72 TPI |
|
Spindle diameter |
50 mm |
|
Spindle stroke |
120 mm |
|
Spindle support |
MK 4 |
|
Engine power |
5.5 kW (7.5 PS) |
|
Machine dimensions (L x W x H) |
2530 x 1000 x 1450 mm |
|
Weight approx. |
1400kg |
